Increase your cable modem or DSL speed in XP


This tweak is for broadband cable connections on stand alone machines with winXP professional version - might work on Home version also. It will probably work with networked machines as well but I haven't tried it in that configuration. This is for windows XP only.


This tweak assumes that you have let winXP create a connection on install for your cable modem/NIC combination and that your connection has tcp/ip - QoS - file and print sharing - and client for microsoft networks , only, installed. It also assumes that winxp will detect your NIC and has in-box drivers for it. If it doesn't do not try this. In the "My Network Places" properties (right click on the desktop icon and choose properties), highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK

1. From the windows XP cd in the support directory from the support cab, extract the file netcap.exe and place it in a directory on your hard drive or even in the root of your C:\ drive.

2. Next, open up a command prompt window and change directories to where you put netcap.exe. then type "netcap/?". It will list some commands that are available for netcap and a netmon driver will be installed. At the bottom you will see your adapters. You should see two of them if using a 3Com card. One will be for LAN and the other will be for WAN something or other.

3. Next type "netcap/Remove". This will remove the netmon driver.

4. Open up control panel / system / dev man and look at your network adapters. You should now see two of them and one will have a yellow ! on it. Right click on the one without the yellow ! and choose uninstall. YES! you are uninstalling your network adapter, continue with the uninstall. Do not restart yet.

5. Check your connection properties to make sure that no connection exists. If you get a wizard just cancel out of it.

6. Now re-start the machine.


7. After re-start go to your connection properties again and you should have a new connection called "Local area connection 2". highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK.

8. Choose connection properties and uncheck the "QOS" box

9. Re-start the machine

10. After restart enjoy the increased responsiveness of IE, faster page loading, and a connection speed boost.


Recommend this article by clicking on +1:

Search Website

Featured Post

10 Tourist Places to Visit in Coorg - తెలుగులో కూర్గ్ ట్రిప్ - Scotland of India

Click for  English Version -   కళ్లను, మనసును మైమరిపించే అద్భుతమైన ప్రకృతి అందాలకు నెలవు ఇప్పుడు మీరు చదవబోయె ప్రాంతం. ఇక్కడి లోయల్ని, కొండ ...

Popular Articles